Industrial Intercom Stations

There is a variety of Pro700 and Alphacom Intercom stations ranging from desktop, and wall mounted , master stations, Clean Room Stations , Vandal Resistant , Industrial and door entry stations.

In the Industrial Intercom station range, there is a station to cover most requirements in; Industrial Plant, Power Stations and Factory’s. Any where heavy duty & robust communications is required.

Industrial Stations for Alphacom Range

1007080000
Light Industrial Master Station with Loudspeaker

Splashproof, grey bayblend plastic housing. Built-in speaker, Mic. & LED. 10W VOX-operated amplifier for ext. 8-20 Ohm loudspeaker.
Size (WxHxD) in mm: 124 x 244 x 63
Weight in kg: 0.9

For use with Alphacon Exchange

1007082000
Noise Cancelling Industrial Master Station

Weatherproof. Noise cancelling Mic. & LED. 10W VOX-operated amplifier for ext. 8-20 Ohm loudspeaker.

Size (WxHxD) in mm: 160 x 240 x 137

For use with Alphacon Exchange

1007086000
Heavy Duty Industrial Master Station

Master station with free access to all extensions and features. 10W VOX-operated amplifier for ext. 8-20 Ohms loudspeaker.Equipped with 4 direct access keys.

Size (WxHxD) in mm: 160 x 260 x 100
Weight in kg: 1.1

For use with Alphacon Exchange

1007083000
Heavy Duty Industrial Substation

Weatherproof. Noise cancelling microphone and built-in loudspeaker, 10W VOX-operated amplifier for external loudspeaker. Programmable call button, simplex and cancel buttons.

Size (WxHxD) in mm: 160 x 260 x 92
Weight in kg: 1.1

For use with Alphacon Exchange

1007085000
Heavy Duty Industrial Substation

Weatherproof. Noise cancelling microphone and built-in loudspeaker, 10W VOX-operated amplifier for external loudspeaker. Programmable call button.

Size (WxHxD) in mm: 160 x 260 x 92
Weight in kg: 1.1

For use with Alphacon Exchange

Industrial Stations for Pro700 Range

AA703
Industrial Master Station

The AA703 is a surface mounted station, a splashproof model designed for humid, dirty and outdoor conditions. It has a flame retardant and chip-resistant casing of durable Bayblend plastic.
The front can be removed to allow easy access during installation and service. The station has an internal 3 Watt amplifier and the speaker volume is adjustable with switches located inside the station, four levels. In addition to the built-in loudspeaker, the unit is prepared for connection of an external speaker. As an optional feature, the 10W power amplifi er FC740 may be used with this speaker. The FC740 also allows you to use the loudspeaker both as loudspeaker and microphone if required (talk-back). The AA703 offers a remote control output via a built-in relay, which can be used to drive external call indicators (lamp/buzzer) or for general remote control facility activated by the calling subscriber.
Colour: Grey

Size (WxHxD) in mm: 124 x 244 x 63
Weight in kg: 0.8

For use with Pro700 System

2213000100
Heavy Duty Telephone

FEATURES
▪ Made for industrial environment
▪ Full phone keypad plus special function keys
▪ Good audio quality
▪ Fluorescing buttons enhance correct dialing
▪ Magnetic reed hook-switch gives minimal tear and wear
▪ Powered by phone line

DESCRIPTION
The STENTOFON Heavy Duty Analogue Telephone is made for environments that need a telephone which can withstand rough usage and treatment. The telephone is well suited for industrial usage – due to the thick aluminum casing, the stainless steel materials, the steel cable into the phone from bottom, and the fluorescing keypad.
The telephone is easy to use with a full keyboard with large buttons. Function keys are for :
• Redial (redials last number)
• Store (storing speed dial numbers)
• Pick (pushed before a key when using speed dial)
External ringer unit recommended – like the HB-90, HB-105 or CRB-7. Wall mounting plate in stainless steel
is suitable for installations which do not give rear access to the phone..
Colour: Yellow

Size (WxHxD) in mm 205 x 320 x 73 weight in Kg 5

For use with Alphacom system

2213000200
Heavy Duty Telephone, with Door

FEATURES
▪ Made for industrial, metro, rail, tunnel and road environment
▪ Full phone keypad plus special function keys
▪ Door has smart stay-open or stay-shut mechanism
▪ Good audio quality
▪ Fluorescing buttons enhance correct dialing
▪ Magnetic reed hook-switch gives minimal tear and wear
▪ Powered by phone line

Size (WxHxD) in mm 205 x 320 x 73 weight in Kg 5

For use with Alphacom System

AA705
Heavy Duty Industrial Master Station

The Heavy Duty Industrial Intercom Master Station is a splashproof model designed for humid, dirty and outdoor conditions and areas where extreme noise occurs. The station is equipped with a noise cancelling microphone. The station consists of an orange makrolon plastic housing and a folio keyboard. The station has an internal 3 Watt amplifier and the speaker volume is adjusted with switches located inside the station, four levels. The unit requires connection of an externalloudspeaker. As an optional feature, the 10W power amplifier FC740 may be used with this speaker. The FC740 also allows you to use the loudspeaker both as loudspeaker and microphone if required (talk-back). The AA705 offers a remote control output via a built-in relay, which can be used to drive external call indicators (lamp/buzzer) or for general remote control facility activated by the calling subscriber.
Colour: Orange

Size (WxHxD) in mm 160 x 240 137 weight in Kg 1

For use with Pro700 System

Which Heavy Duty Intercom System?

Pro700    -     Ideal small system up to 20 stations, 1 speech channel.

There are a wide range of stations available, these include Clean Room ,  Control Room  and Desktop or wall mounted , master stations, also Vandal Resistant,  Industrial and door entry sub-stations. Information on how to wire these Stations is available from here