 |
|
|
|
|
Door Intercom Stations
Both the
Pro700 &
Alphacom
systems have door Intercom stations, a door station is normally a single button station which is designed to be used as part of a Door Intercom system, and is weather resistant and very durable, it has an inbuilt relay which can be controlled from a remote location to give a contact closure for a electronic door lock mechanism.
They can be used for internal or external locations, most Intercom stations can be surface or flush
fitting depending on your location requirements.
Locations where Door Intercom stations are used are:-
Security Barriers, Gates, Reception, Goods In, Help Points, Disabled Refuge Call Point, Car Park Help Points, Car Park Intercom, Outdoor Intercom.
Where tamper resistant stations are required please visit
Tamper Proof and Vandal Resistant Intercom Stations
|
Door Intercom Stations for Alphacom Range
|
Intercom Wall Substation
1007046000
With (1) doorbell button, weather resistant.
Size (WxHxD) in mm: 125 x 280 x 53
Weight in kg: 0.6
Requires
1000602000 ,
flush or
1000603000 ,
surface back box.
Datasheet. (PDF)
For Use with the Alphacom System
|
|
Door Intercom Stations for Pro700 Range |
Door Intercom Station with 1 Call Button, Surface
Door Intercom Station with 1 Call Button, Flush
AB731A/AB731A-F
These door/vandal proof Intercom stations are compact, dust resistant with a very robust construction.
The Intercom stations are made in stainless steel with a 1.5 mm thick front-plate. The construction ensures optimal protection of the push-button, microphone and loudspeaker. The stations are ideally suited for applications in corridors, barriers, security access control, Door Entry, car parks, subway station, Railway Platform etc. They weather resistant so can be used outdoors.
The Intercom stations are equipped with a built-in relay. The station has an internal loudspeaker with a 3 Watt amplifier. An external speaker can easily be connected. The Intercom stations are equipped with a call button for establishing connection with extension number 13. The same call button may optionally be used for door bell function or the CAS function.
AB731A:Intercom Door Station with 1 Call Button, Surface
Size (WxHxD) in mm: 90 x 180 x 65
Weight in kg: 1.5
AB731A-F: Intercom Door Station with 1 Call Button, Flush
The AB731A-F is for flush mounting and comes with a light backbox for EMC protection. When
an optional backbox is needed for concrete mounting, the unit BF934 must be ordered.
Size (WxHxD) in mm: 130 x 220 x 60
Weight in kg: 0.9
AB731A Datasheet. (PDF)
AB731A-F Datasheet. (PDF)
For Use with the Pro700 Intercom System
|
|
|
Which Intercom System?
Systems range from two stations to many thousand ;
Pro700
- Ideal small Intercom system up to 20 stations, 1 speech channel, 1 Music Channel
- There is no need for a central exchange.
- Simple installation loop or star wiring.
- Hands free operation.
- Easy to expand.
- Wide range of features.
Alphacom
- Ideal medium to large Intercom system, from
6 stations on one site, to several thousand,
spread over multiple international sites
- Analogue connected via CAT5 cable in a star configuration.
- Or IP (VoIP, SIP) connected to a local IP network.
- Or a combination of both analogue and IP.
- Large selection of stations.
Interface to PBX exchange and CCTV equipment
There are a wide range of stations available, these include
Clean Room ,
Control Room and
Desktop or wall mounted , master stations, also
Vandal Resistant,
Industrial and
door entry sub-stations.
Information on how to wire these Stations is available from
here
|
|
 |
|
